Products for embedded systems

The Panel-Card is an universally applicable CPU module with an integrated TFT display. The powerful 200 MHz ARM926EJ-S processor delivers particularly good performance and uses very little power. A multitude of different interfaces enable connecting a wide range of peripheral devices. The free operating system Linux is pre-installed and Windows Embedded CE can also be used.

PortuxG20 is a half size euroboard single-board computer based on ARM architecture in combination with Linux open source operating system. High degree of extensibility and cost-efficient.

400 MHz ARM9 CPU module for industrial applications. The Stamp9G20 supports all standard interfaces and peripheral devices. It offers comprehensive power-management features. All that on a board measuring just 53 x 38 x 6 mm!

200 MHz ARM9 CPU module with LCD/TFT interface. The Stamp9261 has 200 processor pins; signal transfer takes place over two industrial-quality 100-pin Hirose FX8 connectors. The board measurement is a meager 53 x 38 x 4 mm.

The 386EX-Card III is a DOS-compatible computer in check-card format (54 x 96 mm) built on the Intel 386EX embedded processor.

MicroARM is an ARM based computer core running with Java VM, built into the standard CompactFlash II format housing. ESD-protection and low power consumption (uClinux possible).

The CompactFlash-sized MicroPC meets the smallest of space requirements. Low power consumption. Perfect for battery-operated devices.

The Portux Panel-PC is a compact and robust industrial computer for rough and adverse surroundings. Equipped with coloured 5.7" TFT, 24 key matrix, protection classification IP54 or IP65 and ARM9 technology. An immediate readiness for service is given by the preloaded bootloader programme U-Boot and Linux.

The Portux920T Mini-PC has a robust housing and with RS232, Ethernet and USB you can use optionally an Analog- or ISDN Modem card.

The MoLUX is an universally Handheld-PC. For the in- and output you can use the 3.5" TFT display and the foil keyboard. MoLUX is ideal suited for the use as mobile device. Integrated Hardware is upgradable with a wide variety of modules and interfaces.

The Panel-PC is a compact industry PC with 320 x 240 pixel LCD, optionally with a touchscreen. Many integrated interfaces und a robust housing.

Our Mini-PC is a very compact 386EX PC with housing. Voltage supply 7 - 35 Volt DC, four RS232 interfaces and a bi-directional parallel port.

MoDOS II is a universal DOS handheld PC with LCD and foil keyboard. The robust housing can be ordered with optional IP65 dust and water protection.

The SAMDIP-7X is a small microprocessor ARM7 board for data encryption and decryption. Supported interfaces: Ethernet, USB 2.0 device, USART, I/O ports and CAN-Bus controller. A starter kit is available.

The SAMDIP-7S is a low-power ARM7 board. Supported interfaces: USB 2.0 device, USART, I/O ports, TWI, ADC and SPI. The board dimensions are 50.8 x 17.6 mm and a starter kit is available.