A5 Starterkit

Item no. 545129

StampA5D36, CortexA5 Starterkit
249,00 net (plus VAT 19% i and shipping)

The A5 Developerbundle by taskit consists of:

 

  • CPU-Module StampA5D36 (256F/256R/1MsF)
  • Baseboard PortuxA5, Rev.01
  • 256 MB Nand Flash, 256 MB LPDDR 1MB ser. Flash
  • Li-Battery CR2032 IB
  • MicroSD Card 8 GB SanDisk incl. Android App
  • Power Supply, 2000mA, 5V, 10W Micro-USB
  • CAT5e FTP Patchcable 1:1, 2m
  • USB 2.0 A-plug to Micro-USB B-plug 1,8m
  • FTDI cable, FTDI USB/RS232-TTL Debug
  • DIN male, type C 96 pins. gew.
  • Software-DvD A5
  • Box Header 2x5 straight no latch, RM=2,54
  • Box Header 2x13 straight no latch, RM=2,5
  • 3,5" TFT Add-on, 320x240, cap. touch

 

Our VAULTsec security concept contains: unreadable key storage, public and private ECC, SHA-256 hashes, encryption chip, safe boot solution by Atmel®, VAES/TDES encryption, clearly hardware serial number, genuine random generator

Technical details

CPU
  • Atmel® AT91SAM5D36 with Cortex-A5 Core
  • 32 kB Data Cache
  • 32 kB Instruction Cache
  • 2 x 16 kB internal SRAM
  • MMU Floating Point Unit (VFPv4)
  • 528 MHz
Memory
  • 256 MB NAND Flash (up to 1 GB)
  • 256 MB LPDDR (up to 512 MB)
  • 1 MB Serial Dataflash
  • 128 KB SRAM
  • Onboard Micro-SD Card Slot
  • 64 MB NOR Flash Memory (opt.)
Security
  • Unreadable Key Storage
  • Public/Private ECC
  • SHA-256
  • Encryption Chip
  • Atmel® Secure Boot Solution
  • AES, TDES Encryption Engine
  • True Random Number Generator
  • Unique Hardware Serial Number
Interfaces
  • 2x 100-pin Fine-pitch Low-profile
    Connectors (Hirose FX8)

  • 3x USB 2.0 High Speed Host
    USB 2.0 High Speed Device

  • Ethernet 10/100 Mbit MAC
  • Ethernet 10/100/1000 GMAC (RGMII)
  • 4x USART / 2 x UART
  • 2x Synchr. Serial Controller (SSC, I²S)
  • 2x Serial Peripheral Interface (SPI)
  • 3x Two Wire Interface (TWI, I²C)
  • High Speed MultiMedia Card Interface
  • 2x CAN Controller
  • Soft Modem
  • 4x PWM
  • Touch Screen A/D Converter ADC
  • LCD/TFT Controller (2048 x 2048 px)
  • JTAG Debug Port
  • Digital Ports - up to 150 available
  • Control Signals: IRQs, BMS, SHDN, WKUP
  • 3x Programmable Clocks
  • Image Sensor Interface (ISI)
Operating system
  • Linux 3.x
  • OpenEmbedded (Ångström), Debian installable
Power supply
  • Supply voltage: 3.3 V DC, 3V Backup
  • Power consumption: 300 mW
Operating temperature range-40..+85°C
Miscellaneous
  • Battery backed Real-Time Clock (RTC)
  • 2x3 32-Bit Timer/Counter
  • Periodic Interval Timer (PIT)
  • Watchdog Timer (WDT)
  • Temperature Sensor
  • Hardware serial number
  • RoHS/RoHS II compliant
Board dimensions53,6 x 42 x 6 mm

Go back

Similar Products