No results were found for the filter!
PXB-USB, Expansion Card for Portux920T EU With USB (Host and Device) Technical details CPU Atmel® AT91RM9200 with ARM920T core ARM9TDMI instruction set 200 MIPS at 180 MHz 16 kB data cache 16 kB instruction cache Memory Management Unit (MMU) External Bus Interface (EBI) Memory...
€58.31 *
Stamp9X25 (256F/128R) StampX25 CXomputer-on-Module 256 MB NAND-Flash 128 MB SDRAM 2 x Ethernet 2 Can-Bus-Controller (figure with baseboard from the developer bundle) Technical details CPU Atmel® AT91SAM9X25 16 kB Data Cache 16 kB Instruction Cache 32 kB...
€94.01 *
Stamp9X35 (256F/128R) StampX35 Computer-on-Module 256 MB NAND-Flash 128 MB SDRAM 1 x Ethernet 2 Can-Bus-Controller TFT-/LCD-Controller (figure with baseboard from the developerbundle) Technical details CPU Atmel® AT91SAM9X35 16 kB Data Cache 16 kB Instruction...
€82.11 *
Stamp9261 (16F/64R) The first one of our successfully STAMP series ARM core with 200 MHz and memory capacity of 64 MB SDRAM / 16 MB Flash EEPROM memory of 256 byte Pre-installed Linux Debian The Stamp9261 prodives LCD / TFT screens with a maximal resolution...
€151.13 *
IO.nut.bme280 The IO.nut.BME280 is equipped with the Bosch BME2880. It is ideal for measuring temperatures, air pressure and humidity. With the RJ12 sockets the IO Nuts can be connected directly to our GPIO systems and enable a perfect sensor system....
€17.85 *
IO.nut.bno055 Contains Bosch BNO55 sensor chip, which is an acceleration sensor. With the RJ12 sockets the IO Nuts can be connected directly to our GPIO systems and enable a perfect sensor system. In our configurator the IO Nuts can be selected...
€17.85 *
PortuxA5D36 1024F/512R PortuxA5 Single Board Computer Based on the StampA5D36 as Cortex-A5 processor core 1 GB Nand Flash 512 MB LPDDR memory An embedded board with many connection possibilities: TFT, Ethernet, USB, DBGU, SD card, JTAG, SPI, CAN, PWM, TWI and...
€297.50 *
Stamp9G20-Base Basisplatine für Stamp9G20 Geeignet für Europakarten-Gehäuse Auch geeignet als Entwicklungs-Board Technische Details Schnittstellen 2x USB-Host Full Speed (12MBit/s) 1x USB-Device auf Micro-USB-B Buchse 1x Ethernet 100Base-T 1x...
€142.80 *
PanelA5D2 - Webterminal The PanelA5D2 as a web terminal is a highly configurable and ready-to-use HMI module for use in control panels or machines. It is equipped with a display unit. The housing is equipped with IP65 front. As a web terminal, the PanelA5D2 can...
€1,185.62 *
Starterkit DropA5D2 mit Nanos-Base Lieferumfang: NanosA5-Base Basisplatine DropA5D22 CPU-Modul USB-Netztiel 10W mit Micro-USB Stecker MicroSD-Karte 8GB mit Linux-Betriebssystem 2x Cat5-Kabel CD und USB 2.0 A-Stecker auf Micro-USB B-Stecker 1,8m
€178.50 *
Stamp9G45-Base Basisplatine für Stamp9G45 Geeignet für Europakarten-Gehäuse Auch geeignet als Entwicklungs-Board Technische Details Schnittstellen 2x USB-Host High Speed (480 MBit/s) 1x USB-Device High Speed auf Micro-USB-B Buchse (alternativ zum...
€166.60 *
Viewed