gpio.base Modul Raspi CM4 without CM4

129,71 € *

inkl. MwSt. zzgl. Versandkosten

Lieferung erfolgt in unter 10 Tagen*

1. Belegung von Platz 1: optional
2. Belegung von Platz 2: optional
3. Belegung von Platz 3: optional
4. Belegung von Platz 4: optional
5. Belegung von Platz 5: optional
6. Belegung von Platz 6: optional
Ihre aktuelle Auswahl: 0,00 €
  • 547830
für das Raspberry Pi CM4 und 6 freien Plätzen zur Belegung mit Ihrer GPIO-Wahl Das gpio.base... mehr
"gpio.base Modul Raspi CM4 without CM4"

für das Raspberry Pi CM4 und 6 freien Plätzen zur Belegung mit Ihrer GPIO-Wahl

Das gpio.base Raspi CM4 ist ein Erweiterungsboard für das Raspberry Pi compute modul 4. Es besitzt 2 USB-Anschlüsse, HDMI-Anschluss, Ethernet-RJ45 und die Raspberry GPIO Stiftleiste. In der Variante "CM4" sind allei Modulplätze frei für Ihre individuelle Belegung. Moduloptionen:

  • Analog Input
  • Analog Output
  • Digital Input
  • Digital Output
  • CAN-Bus
  • RS232
  • RS485
  • Relais
  • RTD-DMS

Für Ihre Anforderungen, stellen Sie sich Ihre persönlichen Funktionen zusammen. Dazu wählen Sie aus unserem großen Modulangebot die passenden Funktionen aus. Wählen Sie bis zu 6 Module je Baseboard. Nutzen Sie den Konfigurator, um Ihre Schnittstellen zusammen zu stellen. Es bietet eine REST-API zur Konfiguration und Nutzung der Hardware. Die Spannungsversorgung erfolgt über die 9...24 Volt Wago Klemme. Auf der SD-Karte können Daten zwischengespeichert oder generell geloggt werden.

Für eine Ausführungen mit vorbestückten GPIO-Modulen, sehen Sie sich das gpio.base Raspi CM4 hier als Starterkit an:

Starterkit bestellen

 

Technische Daten

Interfaces and external signals
  • IEEE1588 Gigabit-Ethernet RJ45
  • 2 USB 2.0 Ports
  • HDMI 2.0 Port
  • Raspberry Pi HAT Connector
  • Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
  • Options for 8GB, 16GB, or 32GB eMMC Flash memory
  • Up to six IO ports/serial communication interfaces, each multiplexed over a Microchip SAME54 co-processor and configurable to operate as either:
    • uart
    • I2C
    • SPI
    • digital IO
    • taskit gpio module interface
SAME54 Co Processor
  • Microchip SAME54N20A Processor
  • ARM Cortex-M4F Core
  • 120 MHz
  • 1 MB Flash
  • 256 KB SRAM
  • CoAP (Constrained Protocol) REST-ful API with HTTP interface over tsbcoap software
  • AT Command API
  • Demultiplexing over MQTT protocol with taskit tsbmqtt software

Power Supply

  • +9 to+24V DC
  • prepared for PoE (Power over Ethernet)
Dimensions
  • 100 x 160 x 25 mm

 

Videos

Kurze Vorstellung des gpio.base Raspi CM4.
Wie ist das System aufgebaut und was bedeutet flexibler modularer Aufbau?

Betriebssystem: Linux
Schnittstellen: Bluetooth Low Energy, Ethernet 10/100/1000, HDMI, I²C, Keyboard, MicroSD-Card-Slot, PWM, Raspberry Pi HAT Connector, SPI, UART/USART, USB 2.0, Wifi
Stromversorgung: PoE , Wago Klemme 9...24V, Wago Klemme 24V
RAM: 4 GB
Batterie: Batterie für RTC
Architektur: ARM v8
Flash-Speichergröße: 16 GB
Eigenschaften: "gpio.base Modul Raspi CM4 without CM4"
Betriebssystem: Linux
Schnittstellen: Bluetooth Low Energy, Ethernet 10/100/1000, HDMI, I²C, Keyboard, MicroSD-Card-Slot, PWM, Raspberry Pi HAT Connector, SPI, UART/USART, USB 2.0, Wifi
Stromversorgung: PoE , Wago Klemme 9...24V, Wago Klemme 24V
RAM: 4 GB
Batterie: Batterie für RTC
Architektur: ARM v8
Flash-Speichergröße: 16 GB
  Technische Details Interfaces and external signals IEEE1588... mehr

 

Technische Details

Interfaces and external signals
  • IEEE1588 Gigabit-Ethernet RJ 45
  • 2 USB 2.0 Ports
  • HDMI 2.0 Port
  • Raspberry Pi HAT Connector
  • Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM
  • Options for 8GB, 16GB, or 32GB eMMC Flash memory
  • Up to six IO ports/serial communication interfaces, each multiplexed over a Microchip SAME54 co-processor and configurable to operate as either:
    • uart
    • I2C
    • SPI
    • digital IO
    • taskit gpio module interface
SAME54 Co Processor
  • Microchip SAME54N20A Processor
  • ARM Cortex-M4F Core
  • 120 MHz
  • 1 MB Flash
  • 256 KB SRAM
  • CoAP (Constrained Protocol) REST-ful API with HTTP interface over tsbcoap software
  • AT Command API
  • Demultiplexing over MQTT protocol with taskit tsbmqtt software

Power Supply

  • +9 to+24V DC
  • prepared for PoE (Power over Ethernet)
Dimensions
  • 100 x 160 x 25 mm

 

 

  Element Beschreibung Download Hinweise Manual for... mehr

 

Element Beschreibung Download Hinweise
pdf Manual for PortuxCM4 Manual Englisch, 2021
pdf Quick Start Guide PortuxCM4 quickstartguide English, 2021
 pdf gpio Software ARM zip-file 03/2021
Kurze Vorstellung des gpio.base Raspi CM4 und den drei Versionen: 1. Starterkit inkl.... mehr

Kurze Vorstellung des gpio.base Raspi CM4 und den drei Versionen:

1. Starterkit inkl. Baseboard, inkl. Modulen und inkl. CM4
2. Konfigurierbar inkl. Baseboard und inkl. CM4
3. Komplett konfigurierbar inkl. Baseboard vorbereitet für Ihre Modulwahl und ihren CM4

Wie ist das System aufgebaut und was bedeutet flexibler modularer Aufbau?

 

Die drei Varianten des gpio.base CM4 in einer Fotoslideshow.
Eine schöne Übersicht und ein toller erster, optischer Eindruck.

 

Zuletzt angesehen